Where are we at?

Re: Where are we at?

Postby ScrapMetal » Wed Mar 28, 2012 3:14 pm

Anyone remember where David U. was on the piston sleeves/caps? It'd be nice to keep things moving along here.

-Ron
Wells-Index 860 Mill
South Bend 11" Lathe
Queen City Shaper
User avatar
ScrapMetal
Site Admin
 
Posts: 225
Joined: Thu Feb 02, 2012 3:39 am

Re: Where are we at?

Postby Turbinedoctor » Tue Apr 10, 2012 1:44 am

I dont remember where he was with those parts. I have tried to reach him but no luck. Is it practical that everyone could build their own if this keeps things moving?

I am open to suggestions.
Durwood
Turbinedoctor
 
Posts: 65
Joined: Thu Feb 02, 2012 5:33 am

Re: Where are we at?

Postby rleete » Tue Apr 10, 2012 5:46 am

You had one guy doing both cylinders and caps? That's quite a lot of work, and lots of material besides.

I might be talked into doing the caps to take the load off.
Homier Speedway 7x14 lathe
Grizzly G8689 Mini Mill
HF 4x6 Bandsaw, bench grinder and more
Years of experience wrecking things
rleete
 
Posts: 62
Joined: Thu Feb 02, 2012 5:22 am
Location: Rochester, NY

Re: Where are we at?

Postby pjf134 » Tue Apr 10, 2012 11:58 am

David U. was going to try and make the cylinders and cap as one piece, don't know if he did it or not and if it really worked. David is losing his machine shop at school very soon and I don't know if he has a shop at home so I think we should proceed without him since he is not answering calls. I think we should seek out someone to make the cylinders because some people in the build may not have the tooling to make them themselfs.
Paul
pjf134
 
Posts: 24
Joined: Thu Feb 02, 2012 9:01 am

Re: Where are we at?

Postby ScrapMetal » Wed Apr 11, 2012 1:02 am

Anyone know of anybody who would be interested in joining our little cabal? Maybe two even? BTW, thanks for volunteering for the caps rleete. Let's see what we come up with first before we decide how/who makes what.

-Ron
Wells-Index 860 Mill
South Bend 11" Lathe
Queen City Shaper
User avatar
ScrapMetal
Site Admin
 
Posts: 225
Joined: Thu Feb 02, 2012 3:39 am

Re: Where are we at?

Postby ScrapMetal » Thu May 10, 2012 2:46 pm

Looks like we have come to a stand-still.

I propose that we collect/disseminate the parts that we have made already.

Would everyone be okay with sending their parts to me and I'll make a "package" of the different parts for each member and ship them out?

We'll deal with how to complete this project once everyone has their copy of what pieces we do have complete.

Let me know what you think,

-Ron
Wells-Index 860 Mill
South Bend 11" Lathe
Queen City Shaper
User avatar
ScrapMetal
Site Admin
 
Posts: 225
Joined: Thu Feb 02, 2012 3:39 am

Re: Where are we at?

Postby B34VD » Thu May 10, 2012 4:55 pm

Sounds like a workable idea, Ron. I could find time to finish one but I am covered up with work at the moment and can't take on any new projects. I would suggest we all add a few bucks in with the parts to help defray the cost of distribution. Bill
B34VD
 
Posts: 26
Joined: Sun Feb 19, 2012 3:54 am

Re: Where are we at?

Postby jgedde » Thu May 10, 2012 5:29 pm

Sounds fine to me too. The flywheels are just gathering dust.

Do me a favor. Whenever there's activity here, drop me an email or maybe have the forum software "ping" me. There's been so little activity, I don't check much anymore. I've "subscribed" but I don't get a notification.

John
jgedde
 
Posts: 6
Joined: Thu Mar 22, 2012 4:42 pm

Re: Where are we at?

Postby pjf134 » Fri May 11, 2012 7:56 am

Sounds good for me too. I think flat rate box will work for shipping in the US, but don't know about out of country. I could throw in the flat rate money with my shipment, just let me know if it works out with the flat rate box.
Paul
pjf134
 
Posts: 24
Joined: Thu Feb 02, 2012 9:01 am

Re: Where are we at?

Postby ScrapMetal » Sat May 12, 2012 1:47 am

Okay guys, I'll send everyone my address in an e-mail. Now, I appreciate that you're offering to throw in some money to defer my shipping costs but I'd prefer you didn't as it's really not necessary.

Thanks guys, watch for the e-mail.

-Ron
Wells-Index 860 Mill
South Bend 11" Lathe
Queen City Shaper
User avatar
ScrapMetal
Site Admin
 
Posts: 225
Joined: Thu Feb 02, 2012 3:39 am

PreviousNext

Return to SOSE Build progress

Who is online

Users browsing this forum: No registered users and 2 guests

cron