Welcome SOSE joint build members

Welcome SOSE joint build members

Postby ScrapMetal » Thu Feb 02, 2012 3:55 am

As you are aware, I have set up this forum to ensure that we can continue our SOSE build. I'm hoping you all like what I've put together even though it's a bit rough at the moment. I will be working to bring it up to your expectations (and mine :mrgreen: )

Best regards,

-Ron
Wells-Index 860 Mill
South Bend 11" Lathe
Queen City Shaper
User avatar
ScrapMetal
Site Admin
 
Posts: 225
Joined: Thu Feb 02, 2012 3:39 am

Re: Welcome SOSE joint build members

Postby ScrapMetal » Thu Feb 02, 2012 4:00 am

Now that I have the niceties out of the way - I screwed up big time! Don't know exactly what happened as I'm still investigating it but I had to flush the database and start over. (I did have a backup but it got flushed as well. - Long, ugly story!) I have made some changes so that this will not happen again. I never had a Linux system crash like this before but it did teach me a lesson about having an alternate "off server" backup system.

I actually think I doomed myself with the "One step forward...." comment. Should have known that was asking for trouble. :mrgreen:

So guys, please re-register and we'll get this thing rolling again.

-Ron
Wells-Index 860 Mill
South Bend 11" Lathe
Queen City Shaper
User avatar
ScrapMetal
Site Admin
 
Posts: 225
Joined: Thu Feb 02, 2012 3:39 am

Re: Welcome SOSE joint build members

Postby Turbinedoctor » Thu Feb 02, 2012 3:19 pm

Welcome back Kotter!
Durwood
Turbinedoctor
 
Posts: 65
Joined: Thu Feb 02, 2012 5:33 am

Re: Welcome SOSE joint build members

Postby rleete » Thu Feb 02, 2012 4:51 pm

Sheesh, if ya wanted me gone, this was a pretty poor way to do it.
Homier Speedway 7x14 lathe
Grizzly G8689 Mini Mill
HF 4x6 Bandsaw, bench grinder and more
Years of experience wrecking things
rleete
 
Posts: 62
Joined: Thu Feb 02, 2012 5:22 am
Location: Rochester, NY

Re: Welcome SOSE joint build members

Postby pjf134 » Thu Feb 02, 2012 10:30 pm

Ron,
Good to see you up and running again. Once everyone gets onboard we can find out where everyone is on the build.
Paul
pjf134
 
Posts: 24
Joined: Thu Feb 02, 2012 9:01 am

Re: Welcome SOSE joint build members

Postby pjf134 » Thu Feb 02, 2012 10:33 pm

Ron,
Glad to see you back up and running.
Paul
pjf134
 
Posts: 24
Joined: Thu Feb 02, 2012 9:01 am

Re: Welcome SOSE joint build members

Postby Turbinedoctor » Fri Feb 03, 2012 6:52 pm

Live and learn. Thanks for all the hard work.
Durwood
Turbinedoctor
 
Posts: 65
Joined: Thu Feb 02, 2012 5:33 am

Re: Welcome SOSE joint build members

Postby ScrapMetal » Fri Feb 03, 2012 9:14 pm

Well, I figured I just did the "two steps back" part, time to get things going forward again. :D

Welcome back guys.

-Ron
Wells-Index 860 Mill
South Bend 11" Lathe
Queen City Shaper
User avatar
ScrapMetal
Site Admin
 
Posts: 225
Joined: Thu Feb 02, 2012 3:39 am

Re: Welcome SOSE joint build members

Postby ScrapMetal » Wed Feb 08, 2012 12:51 am

Just to let you guys know, my wife just pointed out to me that we are going on vacation this Friday the 10th and I'll be away from my hardware :( for a week. Funny how stuff like that can sneak up on a guy. Fortunately I should be able to check in on the tablet computer I got the wife for Christmas to make sure everything is running okay and to activate more users if the rest of the build team (and some others) want to get signed back up on here.

I think things are working fairly smoothly on here (for now :roll: ;) ) and about the only worry I have is some kind of massive power failure at my office that would require me to sign on the server remotely once power is restored. Which I am set up to do (keep your fingers crossed as I haven't tested my "emergency" procedures thoroughly) but it may take a few hours to have things back to normal, especially if I am asleep or away from the tablet. Really doubt that will happen but middle of winter in Nebraska, you never know.

Once I'm back I should be able to finish up the crank discs in pretty short order.

-Ron
Wells-Index 860 Mill
South Bend 11" Lathe
Queen City Shaper
User avatar
ScrapMetal
Site Admin
 
Posts: 225
Joined: Thu Feb 02, 2012 3:39 am

Re: Welcome SOSE joint build members

Postby pjf134 » Thu Feb 09, 2012 11:15 pm

Ron,
Did you have some problems with the site since you put up a backup? I hope you get the bugs worked out so you can relax.
Paul
pjf134
 
Posts: 24
Joined: Thu Feb 02, 2012 9:01 am

Next

Return to SOSE Build progress

Who is online

Users browsing this forum: Google [Bot] and 1 guest

cron